KT600-A REV 1.0 WINDOWS 7 64 DRIVER

KT600-A REV 1.0 DRIVER DETAILS:

Type: Driver
File Name: kt600_a_21002.zip
File Size: 6.5 MB
Rating:
4.2
51 (4.2)
Downloads: 36
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* (*Free Registration Required)

Download Now
KT600-A REV 1.0 DRIVER



KTA ECS ELITEGROUP Motherboard Mainboard Drivers Manuals BIOS

Checking Jumper Settings This section explains how to set jumpers for correct configuration of the moth- erboard. Setting Jumpers Use the motherboard jumpers to set system configuration options.

Jumpers with more than one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pins.

The illustrations below show a 2-pin jumper. This illustration shows a 3-pin When the jumper cap is placed on both pins, jumper. If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is OPEN. kt600-a rev 1.0

Pin 1 is labeled. JP8 1 JP9. Connecting Case Components After you have installed the motherboard into a case, you can begin connect- ing the motherboard components. Refer to the following:. Refer to the table below for information:. kt600-a rev 1.0

Reset Switch Supporting the reset function requires connecting pins 5 and 7 to a kt600-a rev 1.0 tary-contact switch that is normally open. When the switch is closed, the board resets and runs POST. The switch should maintain contact for at least 50 ms to signal the power supply to switch on or off. The time requirement is due to internal debounce circuitry. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the mother- board or its components. On most motherboards, there are small surface-mount resistors near the processor socket, which may be damaged if the cooling fan is carelessly installed.

Avoid using cooling fans with sharp edges on the fan casing and the clips. Also, install the cooling fan in a well-lit work area so that you can clearly see the motherboard and processor socket.

ECS kt600-a User Manual

Before installing the Processor This motherboard automatically determines the CPU clock frequency and system bus frequency for the processor. You may be able to change these settings by making changes to jumpers on the motherboard, or changing the settings in the system Setup Utility. We strongly recommend that you do not overclock processors or other components to run faster than their rated speed. Warning: Overclocking components can adversely affect the reliability of kt600-a rev 1.0 system and introduce errors into your system. Overclocking can per- manently damage the motherboard by generating excess heat in components that are run beyond the rated limits. This motherboard has a Socket processor socket. When choosing a processor, consider the performance requirements of the system. Perform- ance is based kt600-a rev 1.0 the processor design, the clock speed and system bus frequency of the processor, and the quantity of internal cache memory and external cache memory.

The follow- ing illustration shows CPU installation components:. With the lever in an upright position, gently place the CPU on the socket; make sure that all pins line up with the socket holes.

KT600-A REV 1.0 DESCARGAR CONTROLADOR

When pins are aligned, the CPU should seat itself in the socket. The accuracy and accessibility of the resulting translation is not guaranteed. Note: The accuracy and kt600-a rev 1.0 of the resulting translation is not guaranteed.

KT600-A REV 1.0 DRIVER FOR WINDOWS

Seller assumes all responsibility for this listing. Item specifics Condition: Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may kt600-a rev 1.0 a floor model or store return that has been used.

travelmate 7520Shop by category
acer nplifyThat's not you, right?

See all condition definitions - opens in a new window or tab.BIOS Name, BIOS for KTA(PCB). Version, c. Update Description, support AMD K7 Athlon new CPU CPU ID = 6A0h t new I/O kt600-a rev 1.0. ECS KTA - - motherboard - ATX - Socket A - KT overview and full product specs KTA.

KT600-A REV 1.0 DRIVER FOR PC

Packaged Quantity. 1. Compatibility. PC. Revision.

.

Related Drivers